Top loading crane tube

Top loading crane tube

What is a crane pipe or a fluid handling arm? The crane tube is used to transfer fluid products between the pipeline system and the tanker; it can be applied to different tanker sizes; it can be used for positioning or quantitative detection, and when the loading and unloading truck exceeds the set value, it will give an audible and visual alarm or provide a remote signal
Send Inquiry
Product Details

What is a crane pipe or a fluid handling arm?

Crane pipes are used to transfer fluid products between the pipeline system and the tanker;

Applicable to different tanker sizes;

Through positioning or quantitative detection, when the loading and unloading truck exceeds the set value, it will send out an audible and visual alarm or provide a remote signal;

According to the medium, model and customer needs, manual, pneumatic, hydraulic and other operation methods can be adopted;

Nominal diameter DN40~DN200 (1.5~8”);

Design pressure -0.06MPa~5.0MPa;

Design temperature -196~250℃;

Pipe material: carbon steel, stainless steel, aluminum and aluminum alloy, tetrafluoroethylene lining, etc.

The top loading crane pipe, as the name implies, is that the loading connection port of the crane pipe is on the top of the tanker. The connection method can be an open plug-in type, a sealing cap, a loose flange, a quick coupling, a dry quick coupling, etc.


Commonly used topLoading crane tubeThere are the following models:

AL1401 top loading crane tube

AL1401 and AL1402 are one of the commonly used structural forms of loading arms.

It has the characteristics of flexible operation, convenient installation, and easy maintenance.

Applicable occasions: open top loading

Applicable medium: refined oil, chemicals, etc.

Nominal diameter: DN40~DN200

Material: Determined according to media and customer requirements. Such as carbon steel, stainless steel, aluminum and aluminum alloy, fluorine lining, etc.

Design temperature: Determined according to the medium, use conditions and selected materials.

AL1403 top loading crane tube

AL1403 is a commonly used structural form of loading arm.

It has the characteristics of flexible operation, convenient installation, and easy maintenance.

Applicable occasions: open top loading and unloading truck

Applicable medium: refined oil, chemical medium, etc., especially suitable for unloading trucks

Nominal diameter: DN40~DN150

Material: Determined according to media and customer requirements. Such as carbon steel, stainless steel, aluminum and aluminum alloy, fluorine lining, etc.

Design temperature: Determined according to the medium, use conditions and selected materials.

AL1404 top loading crane tube

AL1404 is a commonly used structural form of loading arm.

It has the characteristics of flexible operation, convenient installation, and easy maintenance.

Applicable occasions: open top loading

Applicable medium: heavy oil, refined oil, chemical medium, etc., especially suitable for medium that is easy to solidify at room temperature.

Nominal diameter: DN40~DN150

Material: Determined according to media and customer requirements. Such as carbon steel, stainless steel, aluminum and aluminum alloy, fluorine lining, etc.

Design temperature: Determined according to the medium, use conditions and selected materials.


AL1412 top loading crane tube

AL1412 is a commonly used structural form of loading arm.

It has the characteristics of high oil and gas recovery rate, flexible operation, convenient installation, and easy maintenance.

Applicable occasions: top-tight loading

Applicable medium: refined oil, chemical medium, etc., especially suitable for high volatility and toxic medium.

Nominal diameter: DN50~DN150 (liquid phase), DN25~DN100 (gas phase)

Material: Determined according to media and customer requirements. Such as carbon steel, stainless steel, fluorine lining, etc.

Design temperature: Determined according to the medium, use conditions and selected materials.

AL1512 top loading crane tube

AL1512 is a commonly used structural form of loading arm.

It has the characteristics of high oil and gas recovery rate, flexible operation, convenient installation, and easy maintenance.

Applicable occasions: top-tight loading

Applicable medium: liquid chlorine and other highly volatile and toxic media.

Nominal diameter: DN50 (liquid phase), DN50 (gas phase)

Material: Determined according to media and customer requirements. Such as carbon steel, stainless steel, fluorine lining, etc.

Design temperature: Determined according to the medium, use conditions and selected materials.


Related Products
Send Inquiry